Asphalt Driveway Calculator Cost in Texas (2026)
$90.00–$190per ton (mix + paving)typical 600 sq ft two-car driveway at 3 inches: $56,700–$119,700updated November 2026
Asphalt is sold and priced by the ton, but homeowners measure driveways in square feet. This calculator converts your dimensions to tons (145 lbs per cubic foot of compacted mix, plus 5% waste) and prices the job per ton installed, materials and paving included. Residential driveways are typically 2-3 inches over a prepared base.
Cost calculator — in Texas
Thin overlay / low local rates
$1,030
≈ $90.00 per ton (mix + paving)
Standard 2-3 inch residential driveway
$1,488
≈ $130 per ton (mix + paving)
Thick build, excavation or premium mix
$2,175
≈ $190 per ton (mix + paving)
Estimate covers 11.4 tons (includes 5% waste) × per ton (mix + paving).
Common add-ons not in the base price
- Excavation & gravel base (4-6 in)add $1-3 per sq ft
- Sealcoating (2-3 years later)add $0.5-1 per sq ft
- Removal of old drivewayadd $0.5-2 per sq ft
- Long or steep driveway surchargeadd 10-20%
Price ranges we use
Prices updated November 2026| Tier | Unit price | Typical job (600 sq ft two-car driveway at 3 inches) |
|---|---|---|
| Thin overlay / low local rates | $90.00 per ton (mix + paving) | $56,700 |
| Standard 2-3 inch residential driveway | $130 per ton (mix + paving) | $81,900 |
| Thick build, excavation or premium mix | $190 per ton (mix + paving) | $119,700 |
Texas runs below the national average: installed asphalt driveways run $3-$7/sqft per ProLine and C. Brooks, hot-mix material quotes $80-$160/ton, and Angi's Texas state average is $5,970 per project versus $4,740 nationally. Per-ton tiers blend those local per-sqft and per-ton quotes with the national baseline.
Partial data — single main source. Primary source plus national context; treat as a ballpark.
Sources
- Angi Asphalt Driveway Cost (Texas state data) (retrieved 2026-11-03)
- ProLine Paving - Asphalt Driveway Cost in Texas (retrieved 2026-11-03)
- C. Brooks Paving - Driveway Cost Per Sq Ft in Texas (retrieved 2026-11-03)
- ProMatcher Texas Paving Costs (retrieved 2026-11-03)
Estimates are for planning purposes only. Actual prices vary by project details — always confirm with on-site quotes from licensed contractors.
Get exact asphalt driveway calculator quotes in Texas
Calculators give you the ballpark. Local contractors give you the real number — free, no obligation.
Frequently asked questions
How much does asphalt driveway calculator cost in Texas?
In Texas, expect $90.00–$190 per ton (mix + paving). A 600 sq ft two-car driveway at 3 inches typically runs $56,700–$119,700, with most projects landing near $81,900.
Is asphalt driveway calculator more expensive in Texas than the national average?
No — Texas runs about 13% below the national average ($130 vs $150 per ton (mix + paving)).
How can I pay less for asphalt driveway calculator?
Get at least three itemized quotes — spreads of 20%+ between contractors are common. Schedule work in the off-season (late fall through winter for most exterior projects), bundle neighboring projects together, and keep finishes at mid-range: upgrades on visible surfaces give the best value per dollar.