Siding Installation Cost in Florida (2026)

$3.50–$10.50per sq ft installedtypical 1,500 sq ft of vinyl siding: $5,670–$17,010updated November 2026

Siding is priced per square foot of wall surface, installed. Vinyl is the baseline; fiber cement (James Hardie) runs 40–80% more and wood/stone veneer higher still. Wall area = perimeter × height minus doors and windows — the calculator does that math for you.

Cost calculator — in Florida

Standard vinyl

$4,876

≈ $3.50 per sq ft installed

Premium vinyl / insulated

$9,056

≈ $6.50 per sq ft installed

Fiber cement or engineered wood

$14,629

≈ $10.50 per sq ft installed

Estimate covers 1,393.2 sq ft (includes 8% waste) × per sq ft installed.

Of the mid-range estimate: $4,528 labor · $4,528 materials (typical split)

Common add-ons not in the base price
  • Old siding removaladd $0.5–2 per sq ft
  • House wrap / insulation boardadd $1–3 per sq ft
  • Soffit, fascia, trimadd $2–6 per linear ft
Get exact local quotes — free

Price ranges we use

Prices updated November 2026
TierUnit priceTypical job (1,500 sq ft of vinyl siding)
Standard vinyl$3.50 per sq ft installed$5,670
Premium vinyl / insulated$6.50 per sq ft installed$10,530
Fiber cement or engineered wood$10.50 per sq ft installed$17,010

Typical split: ~50% labor / 50% materials.

Baseline: vinyl siding, materials and labor included. Tampa runs $4-$10/sq ft (1,200 sq ft homes at $7,300-$13,000; average project $7,265); Orlando runs $2.50-$11/sq ft with basic vinyl board at $2-$4.50/sq ft material. Insulated and Dutch lap vinyl reaches $9-$11/sq ft. Low tier sits just under the default sanity floor because entry vinyl genuinely starts near $2.50/sq ft installed in Orlando per Angi. Stucco dominates South Florida exteriors, so vinyl figures reflect the Tampa/Orlando markets.

Sourced from 2+ independent guides. Cross-checked against at least two independent 2025–2026 cost guides.

Estimates are for planning purposes only. Actual prices vary by project details — always confirm with on-site quotes from licensed contractors.

Where the money goes

Line-item breakdown for a typical 1,500 sq ft of vinyl siding. Rows are derived from the same sourced price ranges used above, so they add up to the job total exactly.

Line itemWhat & how muchLowHighBasis
MaterialStandard vinyl siding + house wrap1,620 sqft$2,154$6,465derived from tracked prices
Labor, install and finishSiding crew of 2-3per job$2,835$8,505derived from tracked prices
Job SuppliesFasteners, J-channel, corner postsper job$142$425derived from tracked prices
Equipment AllowanceSiding brake and scaffoldingper job$170$510derived from tracked prices
Remove & HaulOld siding removal (if required)per job$227$680derived from tracked prices
DisposalConstruction debris disposalper job$85$255derived from tracked prices
Unused Min LaborJob site prep and cleanupper job$57$170derived from tracked prices
Total, typical job$5,670$17,010= page totals

Split shares are derived from our tracked labor-share data and typical job cost structures; material quantities are calculated from the job dimensions. Estimates are for planning purposes only. Actual prices vary by project details — always confirm with on-site quotes from licensed contractors.

Siding Installation prices across Florida metros

Published prices are usually city-level — the state range above is aggregated from these metros.

  • Tampa

    $4.00–$10.00 per sq ft installed

  • Orlando

    $3.00–$11.00 per sq ft installed

Get exact siding installation quotes in Florida

Calculators give you the ballpark. Local contractors give you the real number — free, no obligation.

Free for homeowners. We only share your ZIP with contractors — never your contact info without your say-so. See our privacy policy.

Frequently asked questions

How much does siding installation cost in Florida?

In Florida, expect $3.50–$10.50 per sq ft installed. A 1,500 sq ft of vinyl siding typically runs $5,670–$17,010, with most projects landing near $10,530.

Is siding installation more expensive in Florida than the national average?

No — Florida runs about 19% below the national average ($6.50 vs $8.00 per sq ft installed).

How much of the siding installation price is labor vs materials?

Typically about 50% of the total goes to labor and 50% to materials. Labor share climbs on smaller or more complex jobs and in high-cost metros.

How can I pay less for siding installation?

Get at least three itemized quotes — spreads of 20%+ between contractors are common. Schedule work in the off-season (late fall through winter for most exterior projects), bundle neighboring projects together, and keep finishes at mid-range: upgrades on visible surfaces give the best value per dollar.